CONVENTIONAL FIRE DETECTION & ALARM SYSTEM
Allroyd Fire Services the most experienced and trusted company offers you. A range of conventional fire detection, alarm and protection equipments The automatic fire detection system ensures detection of fire in its beginning stage, enabling the occupants to contain the fire before it spreads also to evacuate occupants of the building. An automatic fire detection and alarm system comprises Detectors, Manual Call Points, Hooters Etc., and are wired to the control panel to indicated the effected area.


Benefits of Fire Alarm System

A Fire alarm helps you to be protected in case of fire breakouts. This device is usually made up of electromechincal or other metals and it will help you to make things better. They create a loud noise and you will be able to evacuate the building through alternative and safe passages created already for this purpose. Fire alarms have helped to save innumerable lives and properties, quick response in case of fire, Insurance benefits.

FIRE ALARM SYSTEM REQUIREMENTS:


PHOTO ELECTRIC SMOKE DETECTOR:
These detectors operate on the light scattering effect. A light source is beamed into an area not normally seen by a photo sensitive element. These detectors are preferred where large particulars of combustion are to be detected.


IONISATION DETECTOR:

These Detectors are suitable for a wide range of industrial, commercial and residential applications and operate on the principle of ionization. On entry of smoke into the “Open Chamber” of the detector, the resistance caused is measured and transmitted to the control panel, which is turn, initiates a Fire Alarm.


HEAT DETECTOR:

This Detector is a combination of fixed and rate of rise in temperature operating elements. This detector responds when the predetermined temperature is reached or when the rise in ambient temperature exceeds the predetermined amount.




RESPONSE INDICATOR:

This also known as the Remote Response indicator, as the name suggests, is to visually indicate response of a detector, located in remote (hidden) areas, such as above the false ceiling, below the false floor and inside the rooms which are normally kept closed or locked after office hours

ELECTRONIC HOOTER:

The electronic hooter/speaker is housed in a sturdy M.S.enclosure, capable of producing dual tone (fire alarm). These hooters can also be connected to an amplifier for public address as well. Operates on 24V D.C. and can be surface or flush mounted.

MANUAL CALL POINT:

Manual Call Point is a manually operated device to initiate an alarm. These are made of sturdy M.S. enclosure and are provided with a hammer to break the glass to initiate an alarm.